Bucket Elevator consists of a series of buckets attached to a belt or chain with pulleys or sprockets located at the top and bottom of the unit. TB type bucket elevator adopts plate sleeve roller chain as the traction components, gravity type discharge material. Apply to the middle, big block grinding material, whose density is less than 2t/m3. Material temperature is less than 250°C, capacity can reach 395m3/h, lifting height is approx. 5~50m. They are highly resistant to wear and can be placed for indoor as well as outdoor use.
1. Application widely, not only lifting the common powder, granular, and block material, but also lifting the high grinding material;
2. Low driving power, low energy consumption, energy conservation;
3. For lifting the same material, energy consumption is 1/3~1/2 compared with the link chain bucket elevator;
4. The whole machine with full sealed design, no dust pollution while running;
5.The machine housing case adopt an embossing structure, better stiffness, high precision, good-looking appearance;
| Model | TB250 | TB315 | TB400 | TB500 | TB630 | TB800 | TB1000 |
| Capacity (m3/h) | 20~29 | 51~72 | 85~121 | 135~191 | 207~294 | 281~398 | 398~565 |
| Max. Particle Size | 60 | 60 | 80 | 100 | 125 | 125 | 150 |
| Bucket Type | J | T | T | T | T | T | T |
| Bucket Volume (L) | 4.7 | 11.8 | 25.3 | 50 | 96 | 130 | 232 |
| Bucket Speed (m/s) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Plate Chain Pitch (mm) | 125 | 125 | 160 | 200 | 250 | 250 | 315 |
| Max. Lifting Height (m) | 50 | 40 | 40 | 40 | 40 | 30 | 30 |
Note: The data in this table is for reference only, and the actual parameters are determined according to user needs.
