GX tubular screw conveyor is a mechanism that uses a rotating helical screw blade, usually within a tube to move granular and powdery materials. It is used in many bulk handling industries, installed horizontally or at a slight incline as an efficient way to move the materials.
GX tubular screw conveyor usually consists of a tube containing either a spiral blade coiled around a shaft, driven at one end, or held at the other. The main parts include the tube, shaft with spiral blades, inlet and outlet chutes, as well as the driving device. The rotating part of the conveyor is sometimes called simply an auger.
The conveying capacity is proportional to the rotation rate of the shaft. It is generally operated with the flow of material inclined upward. When space allows, this is a very economical method of elevating and conveying. As the angle of inclination increases, the capacity of a given unit rapidly decreases.
Simple structure, good sealing, large capacity, long service life.
Easy operation, convenient installation, and maintenance.
Working temperature is -20~50°C, with material temperature below 200°C.
Suitable for horizontal and slightly inclined transport of powdery, granular, and small lump materials, such as coal, ash, clinker, cement, grain, etc.
Widely used in construction, chemical, power, metallurgy, coal and grain industries, etc.
| Model | Screw
Diameter |
Screw Rotation
Speed |
Inclination
Angle |
Conveyor
Length |
| (mm) | (r/min) | (degree) | (m) | |
| GX 200 | 200 | 20, 30, 35, 45, 60, 75, 90, 120, 150, 190 | < 20° | 3~70 |
| GX 250 | 250 | |||
| GX 300 | 300 | |||
| GX 400 | 400 | |||
| GX 500 | 500 | |||
| GX 600 | 600 |
Note: The data in this table is for reference only, and the actual parameters are determined according to user needs.
